Mimio Projector Betriebsanweisung PDF herunterladen (Seite 26)

Changing the Projector Settings

Main Menu Submenu Settings

3D AUTO / Off / On

3D Invert Off / On

3D Format Frame Packing / Side-by-Side (Half) / Top and Bottom /

Frame Sequential / Field Sequential

1080p @

96Hz /

144Hz

INTERACTIVE Interactive Settings Off / IR Camera

Adjusting the 3D Settings

You can adjust the 3D settings for your projector.

You can choose how the projector handles 3D images.

n Auto - select the 3D image automatically whenever an HDMI 1.4a 3D timing

identification signal is detected

n Off - turn off 3D functionality

n On - turn on 3D functionality

3D Invert

If you see a discrete or overlapping image while using DLP 3D glasses, you may need to

turn on this feature to get the best picture. This feature adjusts the left/right image sequence.

3D Format

When using 3D mode, select the 3D format that matches the format used by the input

source.

n Frame Packing - supports HDMI 1.4a 3D input signals

n Side-by-Side (Half) - supports HDMI 1.4a 3D input signals

n Top and Bottom - supports HDMI 1.4a 3D input signals

n Frame Sequential - supports DLP Link 3D input signals from VGA / HDMI connector

and HQFS 3D input signals from Composite/S-video connector

n Field Sequential - supports HQFS 3D input signals from Composite/S-video connector

1080p @24

Use this feature to select 96 or 144 Hz refresh rate as using 3D glasses in the 1080p @ 24

frame packing.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Keine Kommentare

Mimio Projector Betriebsanweisung Seite 26